Rested Cleaning Protocols
Cold Pool
Daily Cleaning (End of Day)
- Skim pool for debris.
- Power wash surrounding pool deck and non-slip surfaces.
- Test and adjust pH (7.2–7.6), chlorine (1–3 ppm) or bromine (3–5 ppm).
- Clean handles, ladders, and pool edge with hydrogen peroxide-based cleaner.
- Backwash or rinse filters and clean skimmer baskets.
Weekly Cleaning
- Add non-chlorine or chlorine shock treatment and run pump 20–30 minutes.
- Scrub pool walls with a soft brush.
- Check pump operation and drainage.
- Fully drain and clean interior with mild acid or vinegar solution.
- Refill and rebalance water chemistry.
- Replace or clean cartridge/DE/sand filters.
- Inspect emergency lighting and safety features.
General Safety Notes
- Use only spa-safe, non-toxic cleaning agents.
- Staff must wear gloves and appropriate PPE.
- Post cleaning-in-progress signage.
- Maintain a cleaning log for health inspections and staff visibility.
Pest Control & Drain Maintenance
- Schedule bi-quarterly professional pest control services.
- Conduct weekly enzymatic drain cleanings to eliminate organic buildup.
- Install fine mesh drain covers to prevent insect emergence.
Odor Control & Ventilation
- Maintain HVAC systems and replace filters monthly.
- Use dehumidifiers in high-moisture zones to reduce humidity.
Water Quality & Infection Control
- Implementation of protocols for chemical monitoring and dosing systems.
- Test pH, chlorine, and other levels daily.
- Integrate UV sterilization systems in pool and plunge water circulation.
Enhanced Cleaning Protocols
- Disinfect all communal spaces immediately after use with appropriate agents.
- Provide regular staff training in sanitation and PPE use.
- Keep a log of all cleaning actions for accountability and inspection.
Behavioral Monitoring & Safety
- Use security cameras in communal spaces (excluding private areas).
- Ensure staff presence in high-traffic areas to monitor and support guests.
- Display a clear, visible code of conduct with strict enforcement policies.
- No overcrowding — maximum 40 guests at any one time.
Sauna
Daily Cleaning (End of Day)
- Power wash floors and any non-wooden surfaces using warm water and a mild enzymatic cleaner.
- Wipe benches, backrests, door handles, and walls with a damp microfiber cloth.
- Use a non-toxic wood-safe disinfectant (e.g., hydrogen peroxide-based cleaner). Avoid bleach.
- Sweep or vacuum dry debris before mopping or power washing.
- Empty and sanitize water buckets and ladles with warm, soapy water.
- Run the ventilation system for 15–30 minutes after closing.
- Remove trash and soiled towels.
- Run UV light protocol to sterilize sauna interior, pool deck and all surrounding areas.
Weekly Cleaning
- Lightly sand benches with fine sandpaper to remove buildup.
- Vacuum dust after sanding.
- Check for mold and spot-treat with vinegar or hydrogen peroxide cleaner.
- Wipe walls and ceiling with diluted vinegar solution if needed.
- Replace any wood slats where mold has been spotted.
Monthly Maintenance
- Inspect sauna heaters and replace damaged rocks.
- Replace sauna rocks annually or as needed.
- Apply sauna-safe mineral oil wood protector.
This page reflects our internal cleaning SOPs. Frequencies and agents are reviewed periodically — confirm current chemical suppliers and inspection log format before publishing externally.